Crestron QM-TX, Руководство по эксплуатации

Страница: 27 / 40

Crestron QM-TX QuickMedia™ Transmitter
“Device Settings” Window
NOTE: This procedure sets the Net ID for the QM-TX in the program only. It
does not automatically set the Net ID for the QM-TX itself. SIMPL Windows
automatically changes Net ID values of a device added to a program if a
duplicate device or a device with the same Net ID already exists in the program.
Always ensure that the hardware and software settings of the Net ID match. For
Net ID hardware setting details, refer to “Identity Code” on page 10.
QM-TX Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron control
system by assigning signals to symbols. Click the plus sign of the QM-TX to
reveal the available slot.
Open the QM-TX symbol in Detail View .
Detail View of QM-TX Symbol
The QM-TX symbol contains three digital detection lines for RGB, composite
and component video detection <
RGB Detect >, < Composite Detect >, and
< Y Pb Pr Detect >.
The analog < AudioComp > input and feedback is the volume adjustment for the
program audio input, -10dB to +10dB (-100 to +100 input value). This control
originates on the QM transmitter and is sent over QM with auto-compensation to
the receiver.
Actual adjustment is performed at the receiving end (QM-AE, QM-RMCRX,
QM-MD7x2, etc.).
Operations Guide – DOC. 6334 QuickMedia™ Transmitter: QM-TX
•
23