background image

QuickMedia™ Receiver/Processor                      Crestron 

QM-RMCRX-BA 

 

Detail View of COM Port A (COM Port B is Identical) 

  

COM Port Signals 

SIGNAL TYPE  
AND NAME 

DESCRIPTION 

Optional serial input 
<

tx$

Transmits the corresponding serial data out of the COM port. 

Optional serial output 
<

rx$

Receives serial data from the COM port. 

Optional digital input 
<

enable

Enables the "Serial I/O" functions of the serial driver for as long as the input is high.  
High/1 (level sensitive) = Enable Serial I/O  
Low/0 = Disable Serial I/O 

Optional digital input 
<

break

Generates a break on the rising edge of the input. The break is a string of zeros with 
a length of 17 to 20 bits. 
High/1 (rising edge) = Break  
Low/0 = No effect 

Optional digital input 
<

rts

Activates the RTS (Request to Send) pin on the COM port, for as long as the input is 
high. 
If this signal is used, then the "Hardware Handshaking" option must be set to "None" 
in the Device Settings. Normally this signal would not be used, and a "Hardware 
Handshaking" option would be selected in the Device Settings to handle the RTS pin. 
High/1 (level sensitive) = Activate RTS pin  
Low/0 = Release RTS pin 

Optional digital output 
<

cts

Indicates that the CTS (Clear to Send) pin on the COM port has been activated. The 
output remains high for as long as the CTS pin is activated. 
If this signal is used, then the "Hardware Handshaking" option must be set to "None" 
in the Device Settings. Normally this signal would not be used (If RTS/CTS is 
selected in the "Hardware Handshaking" options, this signal will not be driven). 
High/1 = CTS pin activated 
Low/0 = CTS pin released 

Continued on the following page 

44 

 QuickMedia™ Receiver/Processor: QM-RMCRX-BA  

Operations Guide - DOC. 6332 

Содержание QM-RMCRX-BA













































































Отзывы: