Crestron PC-350V Series, Руководство по эксплуатации продукта

Страница: 51 / 69

51 • PC-350V-12 and PC-350V-18 Product Manual — Doc. 9212A
Current
Over Current Auto Cutoff: Select either the Shut off last outlet or Shut off all outlets radio
button to allow the power controller to shut off the last outlet that drew current exceeding the
set threshold values, or all outlets if the combined amperes of the AC outputs are detected over
the value set in the Over Current Cutoff field.
Over Current Cutoff: Click the up and down arrow buttons or enter the over current cutoff limit
manually. The accepted value range is 1-12 amps.
Voltage
The power controller disconnects power to all outlets if the line voltage exceeds or is lower than
the values set in the following fields.
Under voltage cutoff: Click the up and down arrow buttons or enter the under voltage cutoff
limit manually.
Over voltage cutoff: Click the up and down arrow buttons or enter the over voltage cutoff limit
manually.
Temperature Probe
The power controller sends alert notifications through a Crestron Control Processor if the
temperature is detected over the set threshold values.
Temperature Warning: Move the slider to enable the setting to receive temperature warnings.
Temperature Warning Threshold: Enter the temperature threshold limit. The power controller
sends alert notifications if the temperature is detected over the set value. The temperature
warning persists for 60 minutes after the temperature falls back within the set threshold limit.
Ping Monitoring
Use the settings provided in the Ping Monitoring drop-down menu to configure ping monitoring
for the power controller. The Ping Monitoring allows the power controller to detect if a target
device becomes unresponsive to IP or URL pings and automatically reboots the device.