Outlet Test
Before making connections to the power controller, perform an outlet
test to ensure that the outlet the power controller is plugged into is
properly wired:
1. Connect the included power cord to the power controller.
2. Plug the power cord into the outlet and wait until the POWER LED
and PROTECT LED on the power controller light green. This process
may take several seconds.
3. Verify that the red FAULT LED is not lit.
If the FAULT LED lights, then the connected outlet is not wired
correctly. Fault details can be viewed in the device web user interface.
For more information on monitoring and configuring the device
parameters, refer to the
NOTE:
Do not make any connections to the device until the
connected outlet is wired correctly.
4. Repeat steps 1 and 2 until the FAULT LED stops lighting when the
power controller is plugged into the outlet.
11
PC-350V-12 and PC-350V-18
Quick Start
Vertical Networked Power Controller & Conditioner with Surge Protection and Metering
