Single/Dual-Channel Wireless Mic Receiver
Crestron
MP-FS-RX1/RX2
10
•
Single/Dual-Channel Wireless Mic Receiver: MP-FS-RX1/RX2 Operations & Installation Guide – DOC. 7164B
Operation
Basic Procedures
Before beginning, ensure that the MP-FS-RX1/RX2 receiver is installed and
connected as instructed in “Setup” on page 8, that power is on (the green LED is on),
that line level audio is supplied from a DVD player, a laptop computer, or other
device, and that the MP-FSMIC microphone has been fully charged.
Microphone Button/LED Functions
During the following verification procedures, refer to the illustration above.
Pair Microphone with Receiver
1.
Hold the MP-FSMIC
ON
button until the mic Status LED rapidly flashes green.
2.
The mic begins pairing with the receiver. Make sure the mic has line of sight
proximity to the MP-FSIR. When pairing is complete, the Status LED slowly
blinks green. Time to pair is typically between 5 and 10 seconds. The mic must
be turned off and turned on again to pair to another receiver.
Mute and Volume Adjustments
1.
Press the
MUTE
button to mute the mic (observe the blink pattern); press it
again to un-mute. When muted, the mic automatically turns off after 2 minutes.
2.
When the mic is not muted, the
VOL
button can be used to adjust the mic
volume.
3.
When the mic is muted, the
VOL
button adjusts the line level audio volume.
4.
Line volume is automatically “ducked” (reduced) when the user talks into the
mic.
5.
Hold the
MUTE
button for 5 seconds to turn off the mic (turns off automatically
if muted for 2 minutes, or when placed in the charger.)
6.
If the mic loses sight of the MP-FSIR for 7 seconds (time is configurable), the
mic automatically mutes (turns off automatically if muted for 2 minutes).
7.
If RF link is lost for 10 seconds, mic turns off.
Emergency Trigger
Hold the
ALERT
button for 8 seconds (time is configurable) to generate two beeps
from the speakers and close the alert relay contacts until the button is released.
Содержание MP-FS-RX1
Страница 4: ......
