Crestron MiniTouch MT-1000C, Руководство по программированию

Страница: 8 / 36

3.8 Inch RF Remote Crestron MT-1000C
3. A new window opens to select the installation folder, simply click
NEXT to accept the defaults.
4. If a new window titled “Get Connected” opens, do not click any button
in this window. The “Get Connected” window will automatically
update.
Do not click NEXT.
“Get Connected” Window
5. After both Microsoft ActiveSync and VT Pro-e version 3.3.3.5 or later,
which contains the MT-1000C driver, are installed, you can use
VT Pro-e to create a program and use Crestron Toolbox to upload the
program to the MT-1000C.
6. Plug the USB cable into your computer and then into the MT-1000C.
The hardware wizard will recognize the new addition.
NOTE: Remember which USB port was used in the Active Sync installation.
Other USB ports on your PC may not be setup for the MT-1000C, and may
display a “New Equipment Detected” or similar message, or an error message. If
the “New Equipment Detected” message is encountered, you can follow the
default prompts to apply the drivers already present to that USB port.
NOTE: Although keyed, the USB connector can be inserted up side down. This
will generate an error message.
Programming with SIMPL Windows
NOTE: The following are acceptable file extensions for programs that include
an MT-1000C, developed for specific control system types:
.smw: projectname.smw (SIMPL Windows source file)
.spz: projectname.spz (compiled file for 2-series)
.bin: projectname.bin (compiled file for CNX generation)
.csz: projectname.csz (compiled file for CNX generation with SIMPL+)
.ush: projectname.ush (compiled file for CNX generation w/ SIMPL+ header
file)
.usp: projectname.usp (source code module for SIMPL+)
.umc: projectname.umc (user macro for SIMPL)
4
•
3.8 Inch RF Remote: MT-1000C Programming Guide - DOC. 6330A