Crestron
CNWM-LU12
Lutron
®
Keypad
Operations & Installation Guide - DOC. 8150
Lutron® Keypad: CNWM-LU12
••
7
CNWM-LU12 Symbol
The diagram below shows the CNWM-LU12 symbol. The symbol contains 12
identical outputs and 10 feedback indicator inputs. Only the first 10 button presses
have feedback inputs. Refer to “CNWM-LU12 Physical Views” on page 2 for the
actual button layout.
Detail View of the CNWM-LU12 Symbol in SIMPL Windows’ Programming Manager
How the Example Program Works
NOTE:
For purposes of the following block diagram, the
Grey-Btn
and
White-Btn
outputs of the CNWM-LU12 symbol have been rearranged for clarity. Refer to
“CNWM-LU12 Symbol” above for the correct location of the outputs.
NOTE:
There is no need to recreate the example SIMPL Windows program. The
program is available from the Software Downloads page (EXAMPLES Library) of
Crestron’s website (
www.crestron.com)
. Search for CNWMLU12.SMW. New users
are required to register in order to obtain access to the FTP site.
The example SIMPL program for the CNWM-LU12 is shown on the next page as a
block diagram. Signal
lamp 1
is input to a CNECI-4A for lighting on/off control and
feedback is provided to the CNWM-LU12. The remaining
press2
through
press10
outputs are used for additional lighting and/or drape control. In this example, signals
volume up
and
volume dn
are used to adjust the volume of an audio device through
a CNXVTC-3. No feedback is provided to the CNWM-LU12 for audio adjustments.
