Crestron Isys
®
TPS-4L
3.6-Inch Wall Mount Touchpanel
Setup Menu
SETUP MENU
To obtain the SETUP MENU, shown to the left, press the
Setup
button from the
MAIN MENU. The SETUP MENU offers a series of buttons, which open additional
menus and screens that are detailed in subsequent paragraphs. After setup parameters
have been set, select the
Return
button to return to the MAIN MENU.
NOTE:
For convenience, the current CRESNET ID setting is displayed in the lower
left corner.
NOTE:
All touchpanel settings are automatically saved in non-volatile memory.
Interface
INTERFACE MENU
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
parameters, first select the
Interface
button on the SETUP MENU to display the
INTERFACE MENU screen, shown to the left. Then, use the
CRESNET ID UP
and
DOWN
buttons to set the Cresnet network identity (CRESNET ID).
Use the other buttons on the screen to enable/disable the preferred communications
protocol: Cresnet II, Ethernet, or CIP (Crestron Internet Protocol).
Cresnet II buttons determine the touchpanel’s communication mode. Select
Enable
for normal Cresnet communications (default); select
Disable
to disable the Cresnet
communications interface.
The Ethernet
Enable
and
Disable
buttons determine the touchpanel’s ability to
communicate with other devices via Ethernet.
The CIP
Enable
and
Disable
buttons determine the touchpanel’s ability to
communicate with other Crestron devices using CIP. CIP must be enabled for the
touchpanel to communicate with other Crestron Ethernet devices.
After the Cresnet ID setting has been verified and the communications protocol has
been selected, press
Return
to save the settings and return to the SETUP MENU.
AUDIO MENU
Audio
From the SETUP MENU, press the
Audio
button to open the AUDIO MENU
screen, shown at left.
Press the
WAV
button to open the AUDIO SETUP – WAV screen. Use the buttons
on this screen to set the WAV file volume level, to enable/disable the WAV file
function and to play the WAV file to verify your settings. The area to the right of the
volume UP/DOWN buttons shows the relative volume from 0% to 100%, both as a
numeric value and, for a quick visual reference, as an analog bar.
Similarly, press the KEY CLICK Enabled/Disabled button to open the AUDIO
SETUP – KEY CLICK screen. Use the buttons on this screen to adjust the key click
volume level (0 – 100%), and to enable/disable an audible tone (beep) when the
touchpanel buttons are pressed. The area to the right of the volume UP/DOWN
buttons shows the relative volume from 0% to 100%, both as a numeric value and,
for a quick visual reference, as an analog bar.
Press the
Restore Default Audio Settings
button to cancel any changes and restore
all default audio settings: WAV volume = 100%, and WAV function enabled; key
click volume = 100%, and key click function enabled.
Press
Return
to save the settings and return to the SETUP MENU.
Operations & Installation Guide – DOC. 6449A
3.6-Inch Wall Mount Touchpanel:
TPS-4L
•
9
Содержание Isys TPS-4L
Страница 1: ...Crestron Isys TPS 4L 3 6 InchWallMountTouchpanel Operations Installation Guide...
Страница 4: ......