Crestron infiNET Gateway C2N-MNETGW, Руководство по эксплуатации

Страница: 12 / 40

infiNET™ Gateway/Transceiver Crestron C2N-MNETGW
8
•
infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide – DOC. 6317B
Setup
Network Wiring
When wiring the Cresnet network, consider the following:
•
Use Crestron Certified Wire.
•
Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Please use the Crestron Power
Calculator to help calculate how much power is needed for the
system (
http://www.crestron.com/calculators ).
•
For larger networks, use a Cresnet Hub/Repeater (CNXHUB) to
maintain signal quality.
For more details, refer to “Check Network Wiring” on page 24.
Identity Code
The Net ID of the C2N-MNETGW has been factory set to 0F . The Net
IDs of multiple C2N-MNETGW devices in the same system must be
unique. Net IDs are changed from a personal computer (PC) via Crestron
Toolbox™ (refer to “Establishing Communication” on page 15).
When setting the Net ID, consider the following:
•
The Net ID of each unit must match an ID code specified in the
SIMPL Windows program.
•
Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
Installation Tips
NOTE: Additional information can also be found in the latest revision
of the document titled “Best Practices for Installation and Setup of
Crestron RF Products” (Doc. 6689), which is available from the Crestron
website (
www.crestron.com/manuals ).