Crestron iMedia IM-RX1, Руководство по эксплуатации и установке

Страница: 33 / 36

Crestron IM-RX1 & IM-RX3 iMedia Receiver/Processor
2. Enter your email address and password, and then follow the screen
instructions to download the price list from the SystemBuilder area.
The filename will be pricelist.xml
.
3. Save the pricelist.xml file in the SystemBuilder | Reports subfolder.
The Connection Sheet lists the network devices that are connected to each slot
on the control system.
1. Click the Documentation button on the Finish screen.
2. Select the desired report and click Create | View . This will launch the
default Web browser.
3. Use the Print button to print the report.
Audio Settings
Use the Audio Settings screen to adjust volume, treble, bass and balance in real
time. Before starting real-time mode the program should be uploaded to the
processor and all iMedia and audio equipment should be installed. If no program
has been uploaded the Wizard will attempt build and upload the system.
Use the Bass and Treble sliders to set the bass and treble for audio in the room.
The bass and treble are applied equally to the left and right channels and are
adjustable from 0% to 100%. This maps to a range of -12dB to +12dB.
You can use the sliders to adjust the values up and down, or you can enter
values directly. If you type an out of range value, this will set the level to 0% or
100%.
Click the Reset button to set the bass or treble to 50%. This signifies a flat level
corresponding to 0dB.
Use the Balance slider to set the balance between the left and right speakers.
Click the Center button to position the slider in the center, indicating an even
distribution between the left and right speakers.
Use the Room Volume slider to adjust the overall audio volume level in the
room.
The volume is adjustable from 0% (minimum volume) to 100% (maximum
volume). Use this feature to set the usable volume range.
You can use the slider to adjust the volume up and down, or you can enter a
value directly. If you type an out of range value, this will set the volume to 0%
or 100%.
You can click the Mute button to mute the room audio.
Video Test Pattern
The “Video Test Pattern” window allows you to analyze and maintain the
quality of the video signal.
Use the video test pattern as a reference while you adjust the video using the
peaking control potentiometer (located on the IM receiver).
Specifically, take note of the right side of the black box in the video test pattern:
any white or black streaking will be noticeable there. The adjustment
instructions are displayed on the test pattern image.
Operations & Installation Guide – DOC. 6384 iMedia Receiver/Processor: IM-RX1 & IM-RX3
•
29