Crestron
IM-WCC
iMedia Wall Mount Computer Center
IM
1
This unlabeled eight-pin RJ-45 transport port on the rear side of the IM-WCC
allows connection of the iMedia cable. It carries audio and video signals over
CresCAT-IM cable to an iMedia receiver (IM-RX1 or IM-RX3). For more
information on iMedia cable length refer to the chart on page 3.
NOTE:
Always use CresCAT-IM cable to make iMedia connections.
Industry Compliance
As of the date of manufacture, the IM-WCC has been tested and found to
comply with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Setup
Network Wiring
CAUTION:
In order to ensure optimum performance over the full range of
your installation topology, Crestron Certified Wire, and only Crestron Certified
Wire, should be used. Failure to do so, may incur additional charges if support is
required to identify performance deficiencies as a result of using improper wire.
CAUTION:
Use only Crestron power supplies for Crestron equipment. Failure
to do so could cause equipment damage or void the Crestron warranty.
Installation
The IM-WCC is designed to mount in a standard 2.5-inch (6.35 cm) deep,
double-gang, electrical box.
Tools Required
•
Phillips screwdriver
•
Small flat-blade screwdriver (for connecting the VGA cable)
Mounting Parts Supplied with the IM-WCC
PART DESCRIPTION
QUANTITY
Screw #6-32 x 1 in, Pan Head, Phillips
4
Operations & Installation Guide – DOC. 6382
iMedia Wall Mount Computer Center: IM-WCC
•
7
Содержание IM-WCC
Страница 1: ...Crestron IM WCC iMedia Wall Mount Computer Center Operations Installation Guide...
Страница 4: ......