Crestron IM-WCC, Руководство по эксплуатации и установке

Страница: 5 / 16

Crestron IM-WCC iMedia Wall Mount Computer Center
iMedia Wall Mount Computer
Center: IM-WCC
Introduction
Features and Functions
The IM-WCC is part of the Crestron iMedia line of network devices, room
control systems and signal routing solutions. The iMedia devices currently
include two receivers, IM-RX1 and IM-RX3, and three transmitters, IM-WCC,
IM-TCC, and IM-FTCC-B.
The iMedia Wall Mount Computer Center supports a single computer video and
audio connection in a standard double gang electrical box.
This device uses iMedia (IM) technology utilizing a single CresCAT-IM cable
to transmit computer RGB and stereo audio signals to a single projector or
plasma display. A typical XGA signal (1024 X 768 pixels at 60Hz) can be
transmitted up to 84 feet using iMedia, while higher resolutions up to
1600 x 1200 can be handled over shorter distances. Audio is transmitted
digitally at 20-bit, 48 kHz resolution. To facilitate connection of audio, video,
and computer equipment, all media, power and control signals are routed via a
single CresCAT-IM cable for an uncomplicated installation.
NOTE: The IM-WCC is not a Cresnet
®
device.
Functional Summary
•
One computer RGB input connector
•
One computer audio input connector
•
One iMedia RJ-45 output connector (on the rear side)
•
Power on/off SELECT button and indicator
•
Rotary local volume control
The iMedia System
Using a new, proprietary signal routing solution, RGBHV, audio, power and
control signals are all transported using a single cable solution called iMedia.
Operations & Installation Guide – DOC. 6382 iMedia Wall Mount Computer Center: IM-WCC
•
1