Crestron HD-MD-400-C-E, Дополнительное руководство

Страница: 11 / 40

Supplemental Guide – DOC. 7797D DM Lite HD(I)-MD Auto-Switchers and Extenders
•
7
Navigate the Web Interface
The web interface provides a navigation bar and built-in web pages.
Web Interface (Sample HD-MD-400-C-E Status Page Shown)
The navigation bar provides access to the web pages as follows:
•
Clicking STATUS accesses the Status page, which provides general and
network-related information. For more information, refer to "View Status
Information" on the following page.
•
Clicking ROUTING accesses the Routing page, which allows an input to be
selected and routed to the HDMI output on the receiver. For more information,
refer to "Route an Input to the HDMI Output" on page 10.
•
Clicking INPUTS accesses the Input page, which allows the desired EDID to be
sent to the inputs. For more information, refer to "Configure Input Settings" on
page 11.
•
Clicking OUTPUT accesses the HDMI Output page, which allows the output
resolution to be set. In addition, the output can be enabled or disabled.
For more information, refer to "Configure Output Settings" on page 15.
•
Clicking NETWORK accesses the Network page, which allows network settings
such as hostname and DHCP (Dynamic Host Configuration Protocol) mode to be
set. For more information, refer to "Configure Network Settings" on page 22.
•
Clicking DEVICE accesses the Device page, which allows changes to username
and password settings and also controls various device functions. For more
information, refer to "Configure Device Settings" on page 23.