Crestron HD-MD-400-C-E, Дополнительное руководство

Страница: 37 / 40

Supplemental Guide – DOC. 7797D DM Lite HD(I)-MD Auto-Switchers and Extenders
•
33
To route signals for each of the inputs on the HD-MD-400-C-E transmitter, use the
routing push buttons as follows:
NOTE: The INPUT 2 push button on the receiver must be pressed in order for any of the
inputs on the transmitter to be routed to the output.
•
To enable or disable automatic routing of the inputs, press the AUTO push
button. Pressing the button toggles automatic routing on and off. Automatic
routing is enabled by default.
•
To route the HDMI signal corresponding to the HDMI 2 input on the transmitter,
press the INPUT 2 push button.
•
To route the HDMI signal corresponding to the HDMI 3 input on the transmitter,
press the INPUT 3 push button.
•
To route the RGB (VGA) or component video input signal with an analog audio
signal corresponding to the VGA 4 and AUDIO inputs on the transmitter, press
the INPUT 4 push button.
For each INPUT push button on the HD-MD-400-C-E transmitter, the corresponding
LED functions as follows:
•
AUTO LED: When automatic routing is enabled, the AUTO LED lights green.
When automatic routing is disabled, the AUTO LED turns off.
•
INPUT LED: For each input, the INPUT LED indicates whether the input is routed
and a source is detected:
-
Green indicates that the input is routed to an output.
-
Amber indicates that a source is detected but is not routed.
-
Off indicates that no source is detected and no signal is routed.