Crestron HD-MD-400-C-E, Дополнительное руководство

Страница: 26 / 40

22
•
DM Lite HD(I)-MD Auto-Switchers and Extenders Supplemental Guide – DOC. 7797D
Configure Network Settings
To configure network settings:
1. In the navigation bar, click Network. The Network page opens.
Network Page
2. Configure network settings as required:
•
In the Hostname text box, overwrite the existing hostname with a name
that identifies the switcher on the network. The hostname is restricted to
the letters
a
to
z
(not case sensitive), the digits
0
to
9
, and the hyphen.
The default hostname is HDRX201-
xxxxxx,
where
xxxxxx
consists of the last
six characters (excluding punctuation) of the MAC address of the switcher.
•
Specify whether the IP address of the switcher is to be assigned by a DHCP
server. To set the IP address, click either of the following radio buttons:
-
Obtain an IP address automatically: (Default setting) Allows the IP
address of the switcher to be automatically assigned by a DHCP server
on the local area network (LAN) for a predetermined period of time.
NOTE: If a DHCP server does not exist on the network and 45 seconds
have elapsed since the switcher was powered on, the IP address
defaults to a link-local address. Refer to RFC 3927 for information
about link-local addressing.
- Use the following IP address: Allows a static IP address and related
network settings to be assigned:
• IP address: Enter a unique IP address for the switcher.
• Subnet Mask: Enter the subnet mask that is set on the network.
• Default Gateway: Enter the IP address that is to be used as the
network’s gateway.