d.
Set each octet until the correct IP address is displayed.
e.
To save the IP address and return to the Control System menu, move the
cursor to the rightmost octet, and then press the center button of the Nav
Pad. To cancel the operation and return to the previous screen, press
BACK.
If any changes were made, the HD-XSPA reboots upon exiting the Installer
menu.
Configure the Front Panel
The HD-XSPA’s front panel controls are configured from the Control
section of the Installer
menu. Perform the following to configure the front panel controls:
1.
Open the Installer menu as described in “Open the Installer Menu” on page 4.
2.
Press up or down on the Nav Pad to highlight Control, and then press the center
button of the Nav Pad. The Control menu is displayed.
Control Menu
3.
Press up or down on the Nav Pad to highlight the parameter to be viewed or
configured, and then press the center button of the Nav Pad.
Backlight
The backlight of the LCD display can be adjusted. Perform the following to adjust the
backlight:
1.
Open the Control menu as described in “Configure the Front Panel” above.
2.
Press up or down on the Nav Pad to highlight Backlight, and then press the center
button of the Nav Pad. The backlight switches between the different lighting levels.
Front Panel Lock
The front panel user controls can be locked or unlocked for operation.
NOTE:
The Installer menu can still be opened when the front panel is locked.
Perform the following to lock or unlock the front panel controls:
1.
Open the Control menu as described in “Configure the Front Panel” above.
2.
Press up or down on the Nav Pad to highlight Front Panel Lock: On
or Front
Panel Lock: Off
, and then press the center button of the Nav Pad. The setting
toggles between On and Off.
Control
Backlight
Front Panel Lock: Off
Password
Restore Defaults
Supplemental Guide – DOC. 7448E
HD(I)-XSPA: 4K UHD Surround Sound AV Receiver
•
15
Содержание HD(I)-XSPA
Страница 4: ......
