Keypad Test
On the Diagnostics screen, tap Keypad Test to display the Diagnostic – Keypad Test
screen.
Diagnostic – Keypad Test Screen
The Diagnostic – Keypad Test screen can be used to test the function of the hard keys.
When a hard key is pressed, its corresponding indicator on the screen lights.
Touch Test
On the Diagnostics screen, tap Touch Test to display the touch test screen.
Touch Test Screen
The touch test screen can be used to test the function of the screen. When a location
button is tapped, its indicator on the screen lights. This screen also contains a Calibrate
button to initiate touch screen calibration.
During touch screen calibration, a crosshair appears at the center of the screen. Tap the
center of the crosshair, which then moves to the upper left part of the screen. Tap the
center of the crosshair, and it moves to another part of the screen. Continue tapping the
center of the crosshair until calibration is complete.
NOTE:
When tapping the screen during calibration, be as accurate as possible.
10
•
FT-TSC600: FlipTop Touch Screen Control System
Supplemental Guide – DOC. 7593C
