Assemble Mounting Components
In R-Series mobile UC systems, some component mounting is required. A
device mounting shelf for the included touch screen device is premounted
to the front of the cart. A UC bracket assembly, PoE switch, power
supply, power strip, retractable power cable, and retractable Ethernet
cable are premounted to the cart's interior for convenience.
Assemble the Touch Screen and Tabletop Kit
Prior to mounting the included touch screen device, it must be assembled
with the tabletop mounting kit.
Route Wiring through the Tabletop Kit
Wiring must be routed through the rear of the tabletop kit. Replace the
rear plastic cap with the provided grommet to route the Ethernet cable
through the rear of the tabletop kit. The grommet serves as a strain relief
on the cable.
To route wiring through the rear of the tabletop kit:
1. Remove the two screws on the bottom of the tabletop kit that hold the
metal bracket. Retain the metal bracket and screws.
2. Remove the rear plastic cap by pressing the top of the cap inward until
it unsnaps.
3. Insert the Ethernet cable through the rear opening of the tabletop kit
and attach the provided grommet to the cable.
4. Secure the grommet to the back of the tabletop kit by pressing it into
place.
5. Reinstall the metal bracket using the screws removed in step 1.
Attach the Touch Screen Device to the Tabletop Kit
To mount the touch screen device:
1. Connect the Ethernet cable to the touch screen as described in
.
2. Gently pull excess cable out through the rear of the tabletop kit as the
touch screen and tabletop kit converge.
3. Seat the touch screen in the tabletop kit fully to engage the spring-
loaded retainers built into the metal bracket. Ensure that the touch
screen device snaps into place.
2
UC-FCB Series
Quick Start
Crestron Flex R-Series Mobile UC Systems
