Crestron DualTouch DTT-18, Руководство по эксплуатации

Страница: 16 / 28

Crestron DTT-18 DualTouch™ Technology Touchpanel
Use the 29-pin to 15-pin adaptor (included) for VGA analog signals. Refer to the
following illustration and table for DVI/I to RGB adapter pinouts.
NOTE: Crestron Part Number for this connector: JDCMDVI-VGAMF-1
DVI/RGB Pinouts
Pin 1
Pin 5
Pin 11
Pin 6
Pin 17
Pin 1
Pin 24
C3
C4
C5
C2
C1
Pin 16
Pin 8
VGA (Female) DVI (Male)
DVI/RGB Adaptor Connections
VGA (RGB) DVI CABLE FUNCTION
SHIELD SHIELD GROUND
PIN R6, G7, B8 C5 ANALOG GROUND
PIN 13 C4 HORIZONTAL SYNC
PIN 3 C3 ANALOG BLUE
PIN 2 C2 ANALOG GREEN
PIN 1 C1 ANALOG RED
PIN 5,10 PIN 15 GROUND (+5V & HV SYNC)
PIN 9 PIN 14, 16 POWER +5V/HDT PLUG DETECT
PIN 14 PIN 8 VERTICAL SYNC
PIN 12 PIN 7 DDC DATA
PIN 15 PIN 6 DDC CLOCK
NOTE: The USB cable may be extended using up to four 16-foot active extensions.
Each extension cable must contain a hub (repeater) to regenerate the USB signal
(maximum of 64 feet). Crestron has tested and approved IOGEAR USB Extender
model GUCE50, which allows up to 150 feet over CAT5.
NOTE: Using high quality cable, the VGA cable may be extended up to a
maximum of about 10 meters (32.8 ft.) for analog VGA at 1280 x 1024. If you need
a longer run, add VGA extenders or VGA distribution amplifiers.
•
DTT-18: DualTouch™ Technology Touchpanel Operations Guide – DOC. 6290
12