Crestron DM-RX1-1G, Руководство по эксплуатации и установке

Страница: 21 / 36

Crestron DM-RX1-1G DigitalMedia™ CAT Receiver
Clamping the Cable to the Unit
DM-CBL Installs
Only from Top of Unit
(Or Bottom if Unit is Inverted)
Twisted Braid Must
Fully Contact
Inside of Clamp
9. Strip the outer jacket of the yellow “M” cable 2 inch (51 mm)
from end.
10. Strip the insulation from the ends of each wire, exposing
approximately 3/16 inch (5 mm) of bare copper.
11. Using an adjustable wrench, clamp the prepared “M” cable to the
unit so that the yellow jacket is secured by the clamp.
NOTE: The clamp should fully cover the jacket of the yellow
“M” cable.
Operations & Installation Guide – DOC. 6969B DM
®
CAT Receiver: DM-RX1-1G
•
17