Connecting the Front of the Receiver
Connect the front of the receiver as required for the application.
NOTES:
l
The IR OUT and COM (RS-232) ports are enabled only when the
receiver is connected to an Ethernet-enabled DigitalMedia switcher
or transmitter that is addressable from a Crestron control system.
l
Pass-through mode for CEC is supported when the DM-RMC-4K-
100-C-1G is connected directly to a DigitalMedia transmitter.
Full management of CEC is supported between the locally
connected HDMI® device and a control system when connected to
an Ethernet-enabled 4K DigitalMedia transmitter or switcher that
supports CEC over the HDBaseT connection.
Connections to Front of Receiver
Visit the Product Page
Scan the QR code to visit the product page.
DM-RMC-4K-100-C-1G-B
www.crestron.com/model/6505627
DM-RMC-4K-100-C-1G-W
www.crestron.com/model/6505628
4
DM-RMC-4K-100-C-1G
Quick Start
Wall Plate 4K DigitalMedia 8G+® Receiver and Room Controller 100
