Crestron DM-NAX-8ZSA Скачать руководство пользователя | Manualshive

Страница: 2 / 68

background image

Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.

Regulatory Model: M1845004

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_

.

The product warranty can be found at

www.crestron.com/warranty

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents

.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource

Crestron, the Crestron logo, Crestron Toolbox, DM NAX and DM NVX are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. Dante is either a trademark or a registered
trademark of Audinate Pty Ltd. in the United States and/or other countries. Active Directory is either a trademark or a
registered trademark of Microsoft Corporation in the United States and/or other countries. Pandora is either a
trademark or a registered trademark of Pandora Media, Inc. in the United States and/or other countries. SiriusXM is
either a trademark or a registered trademark of Sirius XM Radio Inc. in the United States and/or other countries.
TOSLINK is either a trademark or a registered trademark of Toshiba Electronics Devices & Storage Corporation in the
United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or
photography.

©2021 Crestron Electronics, Inc.

«
1
2
3
4
...
»

Содержание DM-NAX-8ZSA





































































Отзывы:

Нет отзывов

Похожие инструкции для DM-NAX-8ZSA

Бренд: EAW Страницы: 2

PresentationPro PA300 Plus

Бренд: Califone Страницы: 11

EVO PHONODAC TWO

Бренд: M2TECH Страницы: 2

Бренд: NAD Страницы: 39

Бренд: JL Audio Страницы: 17

Бренд: VINCENT Страницы: 64

JAMP-500HC06-SGR

Бренд: J&M Corporation Страницы: 6

Бренд: Pro-Ject Audio Systems Страницы: 4

Бренд: EAW Страницы: 3

Бренд: B2 Audio Страницы: 12

Бренд: Induction Dynamics Страницы: 4

Phase Linear UPA224

Бренд: Audiovox Страницы: 29

Бренд: Harman Kardon Страницы: 8

Бренд: VINTAGE SOUND AMPS Страницы: 9

Бренд: Cloud Страницы: 7

Бренд: Marshall Electronics Страницы: 1

Sonic Frontiers SFS-40

Бренд: Sonic Frontiers Страницы: 6

Maxcess DLCA NET-ECAT

Бренд: Magpowr Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды