Product Manual — Doc. 7696D
DGE-100 and DM-DGE-200-C • 39
3. Turn off the DHCP toggle.
4. Enter the static IP information in the appropriate text fields. For more information, refer
to
.
5. Select Save Changes on the top right of the accordion.
NOTE: A static IP address can also be set using the
local setup
screen.
Set the Time Zone
The time zone must be set on the DGE if it will not be paired with a control system IP table.
To set the time zone:
1. Access the web configuration interface as described in
.
2. Navigate to DEVICE > Configure Date/Time.
3. Select the time zone where the DGE will be used from the Time Zone drop-down menu.
4. Select Save Changes on the top right of the accordion.
