Product Manual — Doc. 7696D
DGE-100 and DM-DGE-200-C • 35
Initial Setup
Use the following procedures to set up the DGE following installation.
Access the Setup Screens
When power is applied for the first time, a splash screen is shown on a connected touch screen
display. Tap this screen to access the DGE local setup screens for device configuration
(DM-DGE-200-C Setup screen shown).
NOTES:
l
The DGE must be connected to a touch screen display to use its local setup screens.
l
The DGE may take up to two minutes to boot.
For more information on configuring the DGE using its local setup screens, refer to
Access the Web Configuration Interface
The DGE may be monitored and configured using its web configuration interface. The interface
can be accessed via the DGE IP address or the XiO Cloud® service as described in the following
sections.
For more information on configuring the DGE using its web configuration interface, refer to
.
