Mount the Fascia (CSA-ARCH5-BRKT-DUAL)
Motor Wiring
Routing the Cables
To ensure proper functionality and a clean look, consider the following
when routing cables and making connections:
l
The cables should exit the wall near the motor end of the shade
assembly.
l
Route the cables so that they remain out of sight.
l
The brackets provide a cutout in the upper corner, which allows wiring
to be easily run to the motor.
l
A 2-pin connector may be required for shades with a large roll-up
diameter.
l
Use cable ties to secure the cables to the loop on the bracket.
l
Ensure that the cables and connectors do not make contact with the
shade fabric.
Making the Connections
NOTES:
l
When making the connections, do not use CRESNET-HP cable with
the small connector. When using CRESNET-HP cable, replace the
connector on the motor pigtail with the larger connector that is
supplied with the shade.
l
All shades should be home run from the power supply (sold
separately).
19
CSA-ARCH5 Series
Quick Start
Shade Motor Bracket Installation and Motor Programming
