Crestron CNX-BIPAD8 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 32

Crestron CNX-BIPAD8 Скачать руководство пользователя страница 16

Professional Audio Distribution Processor

Crestron

CNX-BIPAD8

12

•

Professional Audio Distribution Processor: CNX-BIPAD8

Operations Guide - DOC. 8160A

Bi-Directional CAT5 Audio Distribution with Integrated Display Device Sound System

Bi-Directional CAT5 Audio/Video Distribution with In-Room Third-Party Surround Sound System

Bi-Directional CAT5 Audio and Digital Audio Distribution with In-Room Crestron Controller,
Digital Audio Surround Sound Processor, and Surround Sound Amplifier

Signal Distribution to More than Eight Rooms

Each CNX-BIPAD8 is capable of distributing audio to eight rooms, maximum. It is
possible to expand distribution to more rooms if additional CNX-BIPAD8s are
introduced to the system. Crestron recommends a maximum of four CNX-BIPAD8s
per system. Therefore, audio can be distributed to a maximum of 32 rooms.

NOTE:

Connecting more than four CNX-BIPAD8s via loop-through may result in

diminished audio quality and signal degradation.

The sixteen sets of four RCA jacks connect independent audio sources to the
CNX-BIPAD8. Of each set, two of the connectors are used for left and right audio
channels; the other two are parallel stereo loop-throughs. The loop-through jacks can

«
...
14
15
16
17
18
...
»

Содержание CNX-BIPAD8

































Отзывы:

Нет отзывов