Crestron CNRACKX-DP Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 44

Crestron CNRACKX-DP Скачать руководство пользователя страница 11

Crestron

CNRACKX-DP

CNX Dual Processor Modular Control System

Leading Specifications

The tables below provide a summary of leading specifications for the CNRACKX-DP.
Dimensions and weight are rounded to the nearest hundredth unit.

Leading Specifications of the CNRACKX-DP

SPECIFICATION

DETAILS

Stand-Alone Viewport

Version 1.55 or later

3

CNX Upgrade File

Version 5.07.00w.upz or later.

4

HW-R (permits physical reset of system) &
SW-R (restarts SIMPL program).

Dimensions & Weight

Height: 5.20 in (13.21 cm)
Width: 19.00 in (48.26 cm)
Depth: 8.31 in (21.12 cm)
Weight: 8.31 lb (3.78 kg)

5

Power Requirements

24VDC from one CNPWS-75 External Power
Supply (not supplied), load factor for the
CNRACKX-DP (2 Watts for the front panel display
and indicators plus 4 Watts for CNXCPU-A plus 4
Watts for CNXCPU-B) is 10 Watts.

1

LCD Display

Reverse mode (yellow on black) LCD backlight;
2-lines, 40 characters per line.

SIMPL Windows

Version 1.30.01 or later

2

with the addition of

smwlib58.exe and smwlib58.txt.

2

Reset Buttons

1

CAUTION:

The total load factor of the CNRACKX-DP depends upon the

components of the control system. Add the power requirements of the
CNRACKX-DP

plus

the two CNXCPU requirements

plus

the requirements of

any other expansion cards. Do not exceed 75 watts for the total load factor.

2

The latest software versions can be obtained from the Downloads page
(SIMPLWIN Library) of Crestron’s website (

www.crestron.com)

. New users are

required to register in order to obtain access to the FTP site.

3

The Stand-Alone Viewport is

NOT

required if the Viewport included with

VisionTools Pro-e v2.05 or SIMPL Windows v1.31 (not available at time of
publication) or later is used. If required, the Stand-Alone Viewport must be
installed into a

SEPARATE DIRECTORY

other than the SIMPL directory

.

The

latest version can be obtained from the Downloads page (SPECIAL Library) of
Crestron’s website. Search for VPORT32.ZIP.

4

CNX upgrade files are required for CNRACKX-DP (use CNRACKX upgrade
file). Filenames for update files have a UPZ extension and can be obtained from
the Downloads page (OPSYS Library) of Crestron’s website.

5

Listed weight is for CNRACKX-DP with CNXCPU-A, CNXCPU-B and no other
expansion cards.

CNRACKX-DP Card Slots (From rear panel, RIGHT to LEFT)

SLOT

DETAILS

CPU A

Card slot for CNXCPU-A.

CPU B

Card slot for CNXCPU-B.

1 through 13

(13) open "card cage" slots accept any CNX Expansion Card.

Operations Guide - DOC. 8151

CNX Dual Processor Modular Control System: CNRACKX-DP

•

7

«
...
9
10
11
12
13
...
»

Содержание CNRACKX-DP













































Отзывы:

Нет отзывов