Crestron CNIRHT-MM, Руководство по эксплуатации

Страница: 11 / 20

Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter
Operations Guide - DOC. 8171 30 Function Hand-Held IR Transmitter: CNIRHT-MM
••
7
8. When the Set Transmitter ID window (shown below) appears,
enter a two-digit hexadecimal number ranging from 10 to FE
and click
OK .
“Set Transmitter ID” Window
9. Making sure that the IR probe of the CNIDC remains
positioned over the CNIRHT-MM sensor, lift and rotate the
CNIRHT-MM so that the front LED is visible.
10. As shown below, observe the Transmitter ID window and then
click OK to set the Transmitter ID.
Click OK in “Transmitter ID” Window
11. When the LED of the CNIRHT-MM stops flashing, the
Transmitter ID has been set. Remove the IR probe of the
CNIDC from the sensor and the LED flashes
three times to
indicate the unit has resumed normal operating mode.
12. Re-install the battery compartment cover onto the battery
compartment.
13. At PC, exit the Viewport and SIMPL Windows or VT Pro-e.
14. Disconnect the 9-pin connector of the CNIDC from the COM
port on the PC.