30 Function Hand-Held IR Transmitter Crestron
CNIRHT-MM
12
••
30 Function Hand-Held IR Transmitter: CNIRHT-MM Operations Guide - DOC. 8171
Example Program
The SIMPL Windows program contained in the CEN/CN-TVAV
determines the functions for the individual keypad buttons of the
CNIRHT-MM. An example program is available from the Downloads
page (EXAMPLES Library) of Crestron’s website (www.crestron.com).
Search for CNIRHTMM.ZIP that contains an example program and
associated macros required to complete the program. New users are
required to register in order to obtain access to the FTP site.
Problem Solving
Troubleshooting
The table shown below provides corrective action for possible trouble
situations. If further assistance is required, please contact a Crestron
customer service representative.
CNIRHT-MM Troubleshooting
POSSIBLE
CAUSE(S)
LED indicator
flashes
continuously.
Battery voltage low.
Replace battery.
LED indicator
does not
illuminate.
Battery bad or dead.
Replace battery.
Battery voltage low.
Replace battery.
CNIRHT-MM not within
direct line-of-sight of
CEN-TVAV or CN-TVAV.
Make sure that CNIRHT-MM is within
direct line-of-sight of CEN-TVAV or
CN-TVAV.
Wrong transmitter in use. If multiple transmitters are accessible,
verify proper unit is used.
Transmitter ID not set.
Transmitter ID set but
does not match code in
CEN-TVAV, CN-TVAV or
host control system.
Improper SIMPL
Windows programming.
Verify that the CEN-TVAV, CN-TVAV
or host control system program.
CORRECTIVE ACTION
TROUBLE
Intermittent
response during
transmission.
CNIRHT-MM
does not
communicate
with CEN-TVAV,
CN-TVAV, or
host control
system.
Set Transmitter ID to match code in
CEN-TVAV, CN-TVAV or host control
system program.
