
Crestron
CEN-NVS200
Network Video Streamer
6. In
the
Trigger
pane, click one of the following radio buttons to set the
trigger type:
•
Video Motion Detection
, which is configured on the “Motion
Detection” page (refer to “Configuring Motion Detection Settings”
which starts on page 53 for information)
•
Periodically
. If selected, enter the time interval in minutes at which the
event is to be triggered
•
Digital Input
, which monitors digital input
•
System Boot
, which triggers the event when the CEN-NVS200 boots
•
Recording notify
, which triggers when the recording fails due to
running out of space or if the recording is overwriting old data
•
Camera Tampering Detection
, which triggers the event when camera
tampering is detected
•
Video Loss
, which triggers the event when the CEN-NVS200 does not
receive the video signal from the camera
•
Video Sync
,
which triggers the event when the CEN-NVS200 receives
the video signal from the camera
7. In
the
Event Schedule
pane:
•
Select the day(s) of the week that the event is to occur.
•
Select the time of the event:
Always
or enter the desired time interval in
hh:mm format.
8. In
the
Action
pane, use the
Trigger digital output for
text entry box to enter
the number of seconds to trigger digital output when an event is triggered.
NOTE:
It is recommended that different media be used in different events
to ensure that all media be produced and received properly.
If the same media is used in different events and the events trigger almost
simultaneously, the server(s) in the second triggered event will not receive
any media but will receive notifications only.
9. Click
Save
to save the settings.
The event name, status, weekly schedule, time schedule and trigger type are
displayed in the
Event Settings
pane of the “Events and Servers”
configuration page. In the sample screen below, one event named
MotionDetect
was added.
“Events and Servers” Configuration Page – Sample Event Settings Pane
To delete an event listed in the
Event Settings
pane, select the event in the
drop-down list and click
Delete
.
Operations & Installation Guide – DOC. 7111A
Network Video Streamer: CEN-NVS200
•
65