Network Video Streamer
Crestron
CEN-NVS200
•
Up:
Tilts the camera upward.
•
Down:
Tilts the camera downward.
•
Home:
Positions the camera to the center.
•
-
(left side of
Zoom
): Allows the camera to zoom out.
•
+
(right side of
Zoom
): Allows the camera to zoom in.
•
-
(left side of
Focus
): Controls the focus near function.
•
Focus:
Controls the focus function.
•
+
(right side of
Focus
): Controls the focus far function.
In addition, PTZ functions can be controlled by selecting the desired value from the
following drop-down lists:
•
Pan speed:
Controls the range of the horizontal movement of the camera.
The greater the value, the greater the angular movement when performing
the
Left
or
Right
functions.
•
Tilt speed:
Controls the range of the vertical movement of the camera. The
greater the value, the greater the angular movement when performing the
Up
or
Down
functions.
•
Zoom speed:
Controls the range of the zooming. The greater the value, the
greater the change in viewing angle.
Preset Function Area:
Identifies and saves the current video view as a preset
location and also sets patrol stops:
•
Patrol selection:
Provides a list of preset positions that corresponds to the
Preset Position:
drop-down list and allows selection of desired preset
positions to be set as patrol stops:
Preset locations:
From the list of preset positions, highlight the
desired position to be set as a patrol stop, then click
Select
. Up to 20
preset positions can be set as patrol stops.
⇒
⇒
⇒
⇒
Selected locations:
Provides a list of preset positions selected as patrol
stops:
•
To remove a preset position from the list of patrol stops, click
Remove
.
•
To move a preset position upward in the list of patrol stops, click
Up
.
•
To move a preset position downward in the list of patrol stop, click
Down
.
To save the patrol selections, click
Save
.
•
Dwelling time (sec):
Specifies the number of the seconds for the following:
The stop time of each preset location during auto patrol of the camera.
The stay time at the leftmost and rightmost positions when the camera
is auto panning.
In the
Dwelling time (sec):
text entry box, enter the desired number of
seconds, and then click
Save
in the bottom of the page to save the setting.
58
•
Network Video Streamer: CEN-NVS200
Operations & Installation Guide – DOC. 7111A
