Crestron CEN-NVS100, Руководство по эксплуатации и установке

Страница: 63 / 76

Crestron CEN-NVS100 Network Video Streamer
•
Digital Input, which monitors digital input
•
System Boot, which triggers the event when the CEN-NVS100 boots
•
Video Loss, which triggers the event when the CEN-NVS100 does not
receive the video signal from the camera
•
Video Sync, which triggers the event when the CEN-NVS100 receives
the video signal from the camera
7. In the Event Schedule pane:
•
Select the day(s) of the week that the event is to occur.
•
Select the time of the event: Always or enter the desired time interval in
hh:mm format.
8. In the Action pane, select one or more of the following checkboxes:
•
Trigger digital output: In the text entry box, enter the number of
seconds to trigger digital output when an event is triggered.
•
PTZ camera patrol: Enables PTZ camera control and sends the
snapshot to the selected server(s) during dwelling time when the event
is triggered.
•
Server name(s): From the Attached media: drop-down list, select the
media to be sent to the selected server(s) when the event is triggered.
NOTE: It is recommended that different media be used in different
events to ensure that all media be produced and received properly.
If the same media is used in different events and the events trigger
almost simultaneously, the server(s) in the second triggered event will
not receive any media but will receive notifications only.
9. Click Save to save the settings.
The event name, status, weekly schedule, time schedule, and trigger type are
displayed in the
Event Settings pane of the “Events and Servers” configuration
page. In the sample screen below, one event named Event1 was added.
“Events and Servers” Configuration Page – Sample Event Settings Pane
To delete an event listed in the Event Settings pane, select the event in the drop-down
list and click Delete.
Configuring Recording Settings
The CEN-NVS100 supports recording on network storage. Up to two recording
entries can be configured.
NOTE: Before configuring recording entries, configure the network storage server
in the Server Settings pane of the “Events and Servers” configuration page. Refer to
“Configuring Server Settings” on page 53 for information.
Operations & Installation Guide – DOC. 6873A Network Video Streamer: CEN-NVS100
•
59