Crestron CEN-HPRFGW, Руководство по эксплуатации и установке

Страница: 23 / 40

Crestron CEN-HPRFGW High Powered RF Gateway
Uploading and Upgrading
Crestron recommends using the latest programming software and that
each device contains the latest firmware to take advantage of the most
recently released features. However, before attempting to upload or
upgrade it is necessary to establish communication. Once communication
has been established, files (for example, programs or firmware) can be
transferred to the control system (and/or device). Finally, program checks
can be performed (such as changing the device ID or creating an IP table)
to ensure proper functioning.
Establishing Communication
Use Crestron Toolbox for communicating with the CEN-HPRFGW; refer
to the Crestron Toolbox help file for details. There are three methods of
communication.
Direct Serial
NOTE: Required for initial setup of Ethernet parameters.
Direct Serial Communication
SERIAL VIA CRESTRON
CABLE STCP-502PC
OR EQUIVALENT
PC RUNNING
CRESTRON TOOLBOX
CEN-HPRFGW
The COMPUTER port on the CEN-HPRFGW connects to the serial port
on the PC via a serial cable (Crestron STCP-502PC or equivalent):
1. Use the Address Book in Crestron Toolbox to create an entry using
the expected serial communication protocol (RS-232, auto-detect
baud rate, no parity, 8 data bits, 1 stop bit, XON/XOFF disabled,
RTS/CTS disabled).
2. Display the CEN-HPRFGW’s “System Info” window (click the
icon); communications are confirmed when the device
information is displayed.
Operations & Installation Guide – DOC. 6587B High Powered Gateway: CEN-HPRFGW
•
19