Crestron CEN-HPRFGW, Руководство по эксплуатации и установке

Страница: 27 / 40

Crestron CEN-HPRFGW High Powered RF Gateway
Operation
Operating
Channel
The operating channel of the CEN-HPRFGW must be set prior to
operation using Crestron Toolbox. The CEN-HPRFGW can operate on
one of 16 channels. The CEN-HPRFGW can operate on a fixed channel
that is set by the installer.
For optimum performance when installing a CEN-HPRFGW in a Wi-Fi
environment, do not set the CEN-HPRFGW to a channel within a Wi-Fi
channel band. Crestron recommends channel 15 or channel 20.
•
Gateway channels 11-14 are within Wi-Fi channel 1 band.
•
Gateway channel 15 is adjacent to Wi-Fi channels 1 and 6.
•
Gateway channels 16-19 are within Wi-Fi channel 6 band.
•
Gateway channel 20 is adjacent to Wi-Fi channels 6 and 11.
•
Gateway channels 21-24 are within Wi-Fi channel 11 band.
•
Gateway channel 25 is adjacent to Wi-Fi channel 11.
•
Gateway channel 26 is neither within or adjacent to any Wi-Fi
band.
For detailed information on RF channels, refer to “Appendix A: The RF
Spectrum” on page 31.
After establishing communication with the CEN-HPRFGW (refer to
“Establishing Communication” which starts on page 19), use Crestron
Toolbox to set the operating channel.
RF Channel
& RF Power
Level
Each gateway can communicate with up to 16 touchpanels on the same
channel. Each touchpanel must have an RF channel assignment that
matches the RF channel assignment of the gateway.
There are 16 possible channels ranging from 11 to 26.
If two or more gateways are operating in close proximity and
experiencing interference problems, you can change the RF power level
to reduce signal strength, which may reduce interference.
Settings for RF channel and RF power level are made from a PC via
Crestron Toolbox. To access these in Toolbox, select
Functions | High
Power RF Gateway… . Refer to the Toolbox Help file and search for
“High Power RF Gateway” for more details.
Operations & Installation Guide – DOC. 6587B High Powered Gateway: CEN-HPRFGW
•
23