5. Press and hold the program button. After 5 seconds, the LEDs
associated with the old button layout begin to flash. Continue to hold
the button.
6. While holding the program button, press all of the buttons in the new
layout. The LED next to the pressed button lights.
NOTE:
If the rocker switch is installed, press the top and bottom of
the rocker.
7. After all of the buttons have been pressed, release the program button
to save the settings.
NOTE:
Changing the button configuration alters the device’s
behavior. Refer to
for details.
Operation
NOTES:
l
Before using the CLW-DIMUEX-P, ensure the device is using the
latest firmware. Check for the latest firmware for the
CLW-DIMUEX-P at
l
The device may be warm to the touch during operation. This is
normal.
Basic Operation
The operations described in this guide assume the CLW-DIMUEX-P is
operating in Local mode (without the use of a control system). The device
can also operate in Remote mode, in which button behavior is dictated
entirely by the control system program. The CLW-DIMUEX-P is shipped
with a rocker button already installed. In this configuration, the unit
functions as described below.
5
CLW-DIMUEX-P
Quick Start
Cameo® In-Wall Universal Phase Dimmer, 120 VAC