Crestron C2N-TFM, Руководство по эксплуатации

Страница: 6 / 48

FM Radio Tuner Crestron C2N-TFM
2
•
FM Radio Tuner: C2N-TFM Operations Guide - DOC. 6233A
RDS/RBDS Feature
The Radio Data System (RDS), a European standard, and Radio Broadcast Data
System (RBDS), a North American standard, permit broadcasters to use a sub-carrier
frequency to transmit inaudible digital data along with their regular FM
programming to receivers equipped to process the data.
The FM Tuner circuitry is compatible with the RDS/RBDS standards; the example
program discussed later in this guide provides some typical applications of this
feature, such as the display of program type name, UTC (universal time clock) data,
program name and category, and traffic information. A typical benefit of this feature
is the ability to search for stations based on program type.
Refer to “Appendix: RDS/RBDS Function Support” on page 41 for more
information.
Mute and Mono Functions
The FM Tuner incorporates automatic as well as manual selection of mute and mono
mode functions.
•
The tuner can be put into mono/stereo mode or mute mode via the
touchpanel.
•
The tuner cannot be put into mono/stereo mode or mute mode via the tuner
controls.
•
After tuning to a station, the tuner will automatically switch to mono mode
if the signal level is low and mono mode is off.
•
The tuner automatically mutes the output during rapid scan functions.
•
After tuning to a station, the radio will automatically mute if the signal level
is too low and the radio-forced mono mode is off.
•
The auto mute/mute feature can be disabled via the touchpanel.
Specifications
The following table summarizes the specifications for the C2N-TFM tuner.
Specifications of the C2N-TFM
SPECIFICATION DETAILS
Power Requirements
FM Tuner only
FM Tuner plus AM/WX Tuner
8.0 Watts (0.3 Amp @ 24 VDC)
16.0 Watts (0.66 Amp @ 24 VDC)
Default Net ID 56
Control System Update Files
1, 2, 3
2-Series Control System
CNMSX-AV/PRO
CNRACKX/-DP
CEN/CN-TVAV
Version 3.038.CUZ or later
Version 5.12.63X.UPZ or later
Version 5.12.63W.UPZ or later
Version 5.12.63V.UPZ or later
C2N-TFM Firmware C2N-TFM.1.12.upg or later
Audio Output
AUDIO OUT L, R
Two RCA connectors for line level stereo audio
Frequency Range 87.5 MHz to 108 MHz
Sensitivity (Usable sensitivity mono/stereo) 11 dBf / 60 dBf
Maximum Signal 100 dBf
(continued on next page)