Crestron APAD, Руководство по эксплуатации и установке, Страница: 9 / 28

Crestron APAD Wall Mount LCD Controller
APAD Front and Rear Face (Bezel Removed)
APAD Controls, Connectors, & Indicators
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
1 Display Screen Programmable display shows pages, menus,
and soft button functions of a project used to
control one or more devices in a Cresnet
system.
2 Reset Button Used alone to reset system defaults. When
pressed while another soft button is pressed,
APAD immediately goes into Setup mode.
3 Power Button Used to execute a power command to one or
more devices in the system.
4 Nav Wheel Used to navigate menus, scroll through lists
and adjust values shown on the display.
5 Soft Buttons Five programmable buttons used with the
Nav Wheel to select the functions and
parameters used to control devices in the
system. Each button can be programmed to
provide a different function on every page of
a given project.
6
NET
24 Y Z G
Four-position terminal block connector for
data and power. Connects to Cresnet control
network. An interface connector is provided.
Pin 1 (24) Power
Pin 2 (Y) Data
Pin 3 (Z) Data
Pin 4 (G) Ground
7 Speaker Built-in transducer for key click sound.
Operations & Installation Guide – DOC. 6455 Wall Mount LCD Controller: APAD
•
5