8x8 DigitalMedia™ Switcher
Crestron
DM-MD8X8
•
View the status of the
USB HID
port.
•
View the EDID mode setting.
•
View the setting for the EDID maximum resolution.
•
Show all of the EDID capabilities of the source device connected to the
HDMI IN
port.
•
Perform a Key Selection Vector (KSV) Limit Test to determine how many
endpoints can be connected to the source.
•
Restore the input name to its default setting.
Name/Rename the Input
To name and/or rename the input:
•
Turn the selection knob to highlight
Name
and press the
ENTER
button. A
cursor will appear next to the current name and controls for changing the
name will also be displayed. To cancel and return to the list of options for
the input card, press the
MENU
button.
Edit Input Name
Edit Input Name
Del
<
>
Done
Blu-ra
y
•
Select letters (upper and lower-case), numbers, or other characters by
turning the selection knob until the desired letter, number, or other character
is displayed on the LCD. Move the cursor to another position by pressing
the soft buttons labeled
g
and
h
. To delete a character, press the soft
button marked
Del
.
NOTE:
The maximum length for any input name is 32 characters.
•
After the new name has been entered, press
Done
to save the name and
return to the list of options for the input card.
Video Settings
The DMC-HD can display information about the video portion of the incoming
signal. Available information includes video type, resolution, frame rate, aspect ratio,
Deep Color setting, HDCP state, and the maximum amount of downstream devices.
To view video settings:
•
Turn the selection knob to highlight
Video Settings
and press the
ENTER
button.
66
•
8x8 DigitalMedia™ Switcher: DM-MD8X8
Operations Guide – DOC. 6755A
