Crestron
DM-MD8X8
8x8 DigitalMedia™ Switcher
To configure a SIMPL Windows program for this layout, drop
DM-RMC-100 devices onto the output cards that are on the DM-Switcher
as shown in the diagram below. The IP table of each DM-RMC-100 will be
automatically configured and uploaded.
DM-RMC-100s Placed on DMC-CATO-HD Outputs
•
Scenario 2: Control Center with Control System and DM Switcher and
DM-RMC-100 Room Controller; Automatic IP Table Configuration
Control Center Containing Control System and DM Switcher Operating with
Classroom Containing Control System and DM-RMC-100 Room Controller
DM-MD8X8
DM-RMC-100
Ethernet
Ethernet
Ethernet
DMNet
CLASSROOM
CONTROL CENTER
CONTROL
SYSTEM
CONTROL
SYSTEM
To configure a SIMPL Windows program for this layout, drop
DM-RMC-100 devices onto the control system’s Ethernet slot. The IP table
of each DM-RMC-100 will require manual configuration.
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into
Detail
View
. Each signal in the symbol is described in the SIMPL Windows help file (
F1
).
Example Program
An example program for the DM-MD8X8 is available from the Crestron website
(
www.crestron.com/exampleprograms
Operations Guide – DOC. 6755A
8x8 DigitalMedia™ Switcher: DM-MD8X8
•
49
