• Do not cause any sharp creases in the heating pad.
• Do not place any objects, e.g. suitcase or washing basket, on
the heating pad when it is switched on.
• Do not place any sources of heat, e.g. hot water bottle or similar,
on the heating pad when it is switched on. These may all
damage the heating pad.
• Do not cover the control 1 and do not place it on the heating
pad when the pad is in operation. The electronic components in
the control 1 of the heating pad cause the control 1 to heat up
slightly during operation.
SAFETY SYSTEM
NOTE: the heating pad is equipped with a safety system. The
electronic sensor technology prevents the entire surface of the
heating pad from overheating by automatically switching off in the
event of a fault. If the safety system switches the heating pad off
automatically as a result of a fault, the temperature display on the
control 1 will no longer be illuminated when the heating pad is
switched on.
Please note that, for safety reasons, the heating pad should not be
used after a fault and should be returned to the service address
indicated.
OPERATION
NOTE: the heating pad may smell of plastic the first time you use it,
but this will disappear after a short period of time.
SWITCHING ON / OFF / SELECTING THE TEMPERATURE
To use the device, first connect the control unit 1 to the heating pad
by plugging the plug-in connector 2 and the plug for the control
unit, 3 together (see Fig. B).
• SWITCHING ON:
Set the control unit 1 to a temperature from 1 - 6 to switch on the
heating pad.
• SWITCHING OFF:
Set Level 0 on the control 1 to switch the heating pad off.
