manualshive.com logo in svg

Crest Audio X 18R, Руководство пользователя, Страница: 33 / 56

Поделиться
Скачать
Crest Audio X 18R Скачать руководство пользователя страница 33

Master Section

3

Front Panel Features

The X 18R & X 20R have a comprehensive output section, including meters, master level controls and 
a flexible group assignment section. 

Headphone Control Section

In normal use, the headphones are used to monitor the Solo system. The Solo system is made 
up of anything that is PFL’d (pre-fader-listen) or AFL’d (after fader listen).
The hierarchy of what appears in the headphones when nothing is soloed, or when the 
SOLO OFF button is pressed is as follows: 
The Selected Monitor Source when 

FROM MONITOR

 is engaged.

The TAPE IN signals

 

when

 TAPE IN

 is engaged and 

FROM MONITOR

 is not engaged.

LEFT and RIGHT masters when neither 

FROM MONITOR

 nor 

TAPE IN

 are engaged. 

NOTE: 

Only the selected source is fed to the Headphones. The different sources do not com-

bine together if multiple switches are depressed.

Headphone jack

This 1/4” TRS jack is intended for stereo headphones. It can also be used as a stereo control-
monitor output from the mixer. From this jack you can get a number of signals, including SOLO, 
Left, Right & Mono, and Monitor/Tape feeds.

Headphone level

This knob controls the level that appears at the Headphone Jack.

SOLO OFF

Solo (PFL or AFL) overrides the default headphone signals unless this button is depressed.
Whenever something is Soloed, it appears in the headphones.
Soloed signals do not appear in the headphones. Useful if an additional L/R feed is needed. 

FROM MONITOR

The post-level control MONITOR output becomes the signal in the headphones when nothing 
is soloed. This overrides TAPE IN if the TAPE IN button is depressed.

TAPE IN

The TAPE IN signals appear in the headphones when the FROM MONITOR button is not 
depressed and nothing is Soloed.

ADD MONO to Phones and ALT OUT (Recessed Switch)

The Mono signal can be added to the LEFT and RIGHT signals at the Phone out, and also 
to the ALT OUT jacks on the rear panel. The switch is recessed to prevent it from acci-
dentally being changed.
The default signal at the Headphone output and the ALT OUT jacks is the stereo LEFT/RIGHT 
mix, the Mono bus is not heard.
In addition to the LEFT/RIGHT mix at he the Headphone output and the ALT OUT jacks, the 
MONO master signal is blended in.

p. 33

Содержание X 18R

























































Отзывы:

Нет отзывов