manualshive.com logo in svg

Crest Audio HP-EIGHT, Руководство пользователя

Поделиться
Скачать
Crest Audio HP-EIGHT Скачать руководство пользователя страница 61

master section

8

p. 61

Master Section: Monitoring & Control

Overview

The HP-Eight is equipped with versatile monitoring, talkback and muting sections that allow the
operator to monitor and control the various signals within the Console.A brief overview of each
is presented, then each section will be described on its own.

Monitor Section

The dedicated Monitor Section allows the user to listen to and view the various signals operating
within the Console.This section consists of: the monitor select circuitry and dual LED meters,
the Solo system, and the headphone system.

To better control the overall operation of the HP-Eight, the user should ensure that the signals
within the console are being mixed as intended, and are operating within the proper limits.The
Monitor section allows the operator to select any of the main mix buses (alone or in combina-
tion), and then listen to and view the levels of those signals.A pair of TRS output jacks are provid-
ed to feed these signals to an external amplifier/speaker system.Those rear-panel jacks are con-
trolled by the Monitor Level pot.

Solo System

Each Input and Output circuit of the console is equipped with a Solo switch. For the Inputs, this
switch is labeled PFL (Pre-Fader-Listen), for the Outputs,AFL (After-Fader-Listen). Both types of
these switches feed the associated Input or Output signal into the Console’s Solo bus.The Solo
System feeds the Monitor Section and allows the operator to listen to and view that solo'd sig-
nal.The Solo bus is a summing bus which will mix all selected signals together: if multiple Solo
switches are depressed, the user will hear that mixture.The Solo signal is displayed on the L & R
Solo Meters (shared with the Monitor Section)

Headphone System

The headphone system is normally fed by the Monitor Section.Whatever is selected there can
be listened to on the headphones. If the Solo System becomes active, the headphones automati-
cally switch-over to monitor the Solo bus.

Talkback Section

The operator can use the built-in facilities of the HP-Eight to talk to the main, group or aux
buses in the console. Often times the operator will need to selectively communicate with a per-
former, or slate a performance during a recording.The talkback section, with its own microphone
input jack, can be used for this purpose.

Mute Scene Section

The HP-Eight provides 4 manual mute scenes. Each of the Mono Input channels can be assigned
to any of these scenes, allowing for selective muting control of different groups of input channels.
Different collections of voices or instruments can be grouped together for overall muting, or dif-
ferent mute scenes can be constructed for the various sections of a performance.

Output Metering

10 dedicated LED meters show the output level of whatever signal is being controlled by the
100mm faders. Normally the 8 Group outputs, along with L&R are displayed. If a Fader-Flip
switch is depressed, that corresponding Aux output is displayed instead.

Содержание HP-EIGHT





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды