Crest Audio HP-EIGHT, Руководство пользователя

Страница: 29 / 84

p. 29
stereo inputs
EQ
features
Many audio signals coming into the console require some degree of corrective
equalization in order to be part of a good sounding mix.
Each Stereo Input is equipped with a fixed-frequency, three-band EQ.The HF and
LF bands have a shelving response, the MF band is bell-shaped, centered at
3kHz.The EQ circuitry is always in the signal path, set all EQ controls to “0” (flat)
if no equalization is desired.
high frequency —HF
15dB boost and cut at 10kHz—Shelving Response.
mid frequency —MF
15dB boost and cut centered at the 3kHz, Q of 1.5.
low frequency —LF
15dB boost and cut at 80Hz—Shelving Response.
aux send features
Two aux sends are available for creating individual output mixes from the Stereo
Inputs.These mixes can be used for driving effects processors, providing monitor
mixes, creating broadcast or alternate sound reinforcement mixes, or other spe-
cial requirements.The signal fed to each of the Auxes is a sum of the Left & Right
stereo signals.The Aux sends are normally fed from the Post-fader stereo signal.
When the PRE switch is depressed,the Aux sends are fed from the Post-EQ,Pre-
fader signal.The Aux sends are always affected by the Mute switch.
aux sends 9-10
These knobs adjust the amount of signal sent to the corresponding Aux
buses. Unity gain occurs at the zero setting, with 6dB additional gain available
above that.
PRE ( aux 9–10 )
The default signal source for the aux sends is post-fader.This switch is used for
selecting the Pre-fader signal for the Aux sends. The Pre-fader signal is derived
Post-EQ.
Aux sends are Post-fader.
Aux sends are Pre-fader (Post-EQ)
2