Cresent Kayaks Solo Skiff, Руководство пользователя

Страница: 6 / 9

POWERING YOUR SOLO SKIFF
Y
OU MUST MAKE SURE THE FRONT
OF THE CAVITATION PLATE IS NOT
RUBBING THE HULL OF YOUR SOLO
SKIFF. THIS WILL CAUSE DAMAGE-
POSSIBLY PUNCTURING THE HULL, A
DANGEROUS SITUATION, AND WILL
VOID YOUR WARRANTY
1. Install motor on transom per motor manufacturers instructions.
2. Do not drill through your transom to mount motor.
3. Clamp motor tight enough to avoid slippage off transom.
4. Adjust trim pin on motor so cavitation plate does not boat while under power or at rest.
5. Be sure motor is centered on transom.
6. Double check that cavitation plate does not contact hull.
7. The first time you run the boat, motor a very short distance and double check clearance.
CAUTION!!!
CAVITATION PLATE
IF YOU ARE HAVING TROUBLE ADJUSTING THE MOTOR SO IT DOES NOT RUB CALL YOUR LOCAL
SOLO SKIFF PRO - DO NOT USE BOAT IF IT IS RUBBING OR YOU HAVE A DOUBT
TRIM PIN - SEE MOTOR
OWNERS MANUAL FOR
DETAILS HOW TO
ADJUST MOTOR TRIM
ANGLE
PAGE 6