Trendsetter 400/800
4
Trendsetter 400/800
Operator Maintenance and Operations
1
2
3
4
5
6
7
8
Operations
Turn on the output device
4
These operations are required for some of
the maintenance procedures below.
Turn off the output device
4
Reset the output device
9
Maintenance
Work to
Be Done
How
Often
Date Work
Completed
Exterior surfaces
Clean
Weekly
Load ramp
1
Clean
Plate roller *
8
Clean
Monthly
Edge detection strip *
7
Clean
Every three
months
Compressed air supply
fi lters:
Three
months or
as needed
5 micron fi lter *
2
Replace
0.01 micron fi lter *
3
Replace
Air intake fi lter *
5
Replace
Universal Debris Removal
Cabinet (UDRC) fi lter **
6
Replace
As needed
N/A
* Procedures for these items are included in this visual quick reference guide.
** Media dependent
Note: This document is not intended as a substitute for the
Trendsetter 400/800
Operator Manual
. Refer to the operator manual for detailed procedures.
Software may display differently depending on the version of Print Console in use.
9
