18
Chapter 2 Preparation
3.
3.
3.
3.
When the first row is full, continue to the next row, and so on.
Make sure each slide is in its correct orientation.
Inserting slides into the slide holder
4.
4.
4.
4.
Mount the slide holder in the scanner with the printed side facing
you; insert the two (2) right registration holes of the slide holder
into the two right registration pins of the
Base glass
(the left hole
and pin are not used). The right side of the slide holder should be
aligned with the right side of the glass.
5.
5.
5.
5.
For more than 20 slides, use the second slide holder. Insert the
slides in the second slide holder in the same manner as in the first
holder.
For efficient scanner work, it is recommended that the bottom row is filled
first, and that each row is filled starting at the end of the row.
