XLAMP
®
MH FAMILY LED SOLDERING & HANDLING
© 2014-2021 Cree LED. The information in this document is subject to change without notice. Cree
®
and the Cree logo are registered trademarks, and
the Cree LED logo is a trademark, of Cree, Inc. XLamp
®
is a registered trademark of Cree LED. Other trademarks, product and company names are
the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. This document is
provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at
www.cree-led.com.
CLD-AP193
REV 4
3
Pick & Place Nozzle
The following diagrams show examples of pick & place tools to remove MH Family LEDs from the factory tape and reel packaging. Cree
LED recommends using a spring‑relieved pick and place nozzle with a spring constant of 0.519 lb‑ft (0.704 N‑m). For pick and place
nozzles coming into contact with silicone-covered LED components, Cree LED recommends nozzles be constructed of non-metallic
materials. Cree LED and several of Cree LED’s customers have had good success using nozzles fabricated from 95a urethane.
All dimensions in mm.
Measurement tolerance unless indicated otherwise:= ±0.2 mm
MHB-x
3.300
.300
.400
5.000
+.05
-0.1
5.000
+.05
-0.1
7.000
7.000
n
1.000
.357
2.857
1.071
2.857
1.071
50.0
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
2
3
4
5
6
6
5
4
3
2
1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X
`
.5
.XXX
`
.25
.XX
`
.75
.X
`
1.5
FOR SHEET METAL PARTS ONLY
.XX
`
.25
.XXX
`
.125
X
`
.5
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
w
1/1
16.000
A
12003239
COLLET
NBR
2/2/15
D. CRONIN
REVISONS
REV
DESCRIPTION
BY
DATE
APP'D
1.071
7.000
.357
1.071
Ø1.000
2.857
2.857
7.000
5.000
+.05
-0.1
5.000
+.05
-0.1
.300
.400
3.300
50.0