8 of 8
LPN00644X0007A0_A
© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
®
and the Cree logo are
registered trademarks of Cree, Inc.
www.creelighting.com
SECTION 5:
ELECTRICAL CONNECTIONS
STEP 1:
For 120/277/347V
applications make the following Electrical
Connections:
a. Connect the black luminaire lead to the supply lead.
b. Connect the white luminaire lead to the neutral
supply lead.
c. Connect the green or green/yellow ground lead to
the green supply lead.
For 208/240V
applications, make the following Electrical
Connections:
a. Connect Hot 1 supply lead to the black lead.
b. Connect Hot 2 supply lead to the white lead
c. Connect the green or green/yellow ground lead to
the supply ground lead.
STEP 2:
a. If Dimming is an option; connect the violet dimming
positive lead to the supply dimming positive lead. If
dimming is not being used, ensure to cap off the violet
lead.
b. If Dimming is an option; connect the grey dimming
negative lead to the supply dimming negative lead. If
dimming is not being used, ensure to cap off the grey
lead.
GREEN
LINE-BLACK
GROUND-GREEN
NEUTRAL-WHITE
DIM (-) GREY
DIM (+) VIOLET
VIOLET
GREY
C
ORD
/ SUPPL
Y WIRING
LUMINAIRE
NEUTRAL OR HOT 2
LINE OR HOT 1
FCC NOTICE
CAUTION:
Changes or modifications not expressly approved could void your authority to use this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
CAN ICES-005 (A)/NMB-005 (A)
