2
INTRODUCTION
If you experience any difficulty with the installation or operation of your new
shower, then please refer to the “What to do if things go wrong” section in this
manual before contacting us.
Section
Introduction . . . . . . . . . . . . . . . . . . . . . .
Important Safety Information . . . . . . . . . .
How to install your
SPA300C
Shower . . . . .
Cold Water Inlet Pipe Configuration. . . . . . .
Assembly of Accessories . . . . . . . . . . . . . .
How to maintain your
SPA300C Shower
. . . .
Additional Accessories and Common Parts . .
How to use your
SPA300C Shower
(Detailed)
Page
2
2
3
5
7
7
7
8
Section
What to do if things go wrong (1)
Self Help . . . . . . . . . . . . . . . . . . . . . . . . .
What to do if things go wrong (2)
Professional Service . . . . . . . . . . . . . . . . .
How your
SPA300C Shower
Works . . . . . . .
Creda After Sales Service . . . . . . . . . . . . .
Guarantee and Contact Details . . . . . . . . . .
How to use your
SPA300C Shower
(Summary)
Page
9
9
10
11
11
12
Thank you for purchasing a quality
Creda SPA300C Shower
manufactured in England.
To enjoy your new shower at its best, please take time to read this manual thoroughly to
familiarise yourself with all instructions, BEFORE beginning installation.
Having done so, keep this manual handy for future reference.
Your shower is designed to stabilise temperature changes caused by water pressure fluctuations.
These can result from toilets being flushed or taps being turned on and off.
When this happens your showering temperature will be held within a controlled band, provided that
the minimum pressure required by the shower is maintained (see “Effect of Other Water Devices”).
1.
Your shower has been designed for convenience, economy and safety of use, provided that it is
installed, used and maintained in good working order and in accordance with our instructions and
recommendations.
2.
All wiring and installation must be supervised by a suitably qualified person.
3.
THIS APPLIANCE MUST BE EARTHED.
4.
The installation must be in accordance with the current edition of BS.7671 (
the “IEE Wiring
Regulations”)
and “Part P” of the
“Building Regulations”
in force at the time of installation.
Installations outside of England and Wales must also conform to any local regulations in effect.
This appliance is intended to be permanently connected to the fixed electrical wiring of the mains
supply with its own dedicated supply.
5.
This appliance must
NOT
be fitted where it may be subjected to freezing conditions.
6.
DO NOT
switch the appliance on if you suspect it of being frozen.
Wait until you are sure it has thawed out.
7.
DO NOT
fit any sort of tap or control on the appliance outlet. The appliance is designed to have
an open outlet and should only be used with “Creda” recommended fittings.
8.
Take care to avoid restricting the outlet of the pressure relief device. If water is discharged from
the pressure relief device, maintenance will be required before the appliance can be safely used.
9.
Isolate the mains electrical and water supply before removing the front cover of the appliance.
CONTENTS
IMPORTANT SAFETY INFORMATION