Creda CLSTH050 Скачать руководство пользователя страница 19

   Important

During the initial operation, some odour may 

be noticed due to the newness of materials 

used in manufacture. This is normal and will 

disappear after a short period or use. It is 

however advisable to keep the room

well ventilated.

Cleaning

WARNING - ALWAYS DISCONNECT 

FROM THE POWER SUPPLY BEFORE 

CLEANING THE HEATER.

Before commencing cleaning, disconnect 

the electricity supply to the appliance and 

allow it to cool. The outside can be cleaned 

by wiping it over with a soft damp cloth and 

then dried. Do not use abrasive cleaning 

powders or furniture polish, as this can 

damage the surface fi nish. To release the 

heater from the wall bracket for cleaning 

or redecoration, remove the screw from 

the wall bracket and lift the heater upwards 

(See Fig. 1 and 2, page 5).

Recycling

 For electrical products sold within the 

European Community. At the end of the 

electrical products useful life it should not 

be disposed of with household waste.    

 Please recycle where facilities exist. Check 

with a Local Authority or retailer for recycling 

advice in your country.

After Sales Service

If this product appears damaged when 

fi rst received or does not function correctly 

contact us by e-mail at services@

credaheating.co.uk or call 0844 879 3588 

(UK only).

Do not return the product in the fi 

rst 

instance as this may delay us providing you 

with a satisfactory service. ACCIDENTAL 

DAMAGE IS NOT COVERED UNDER

THE WARRANTY. 

Your product is guaranteed for two years 

from the date of purchase. Within this period 

we undertake to repair or exchange this 

product free of charge provided it has been 

installed and operated in accordance with 

these instructions.

Should you require assistance with this 

product please go to www.credaheating.

co.uk and click on “Help Centre” or e-mail 

us at [email protected]

Alternatively call our contact centre on 

0844 879 3588 (UK only). This is a Lo-call 

number from a BT Landline - other providers 

including mobile phones may charge you 

more.

To assist you, we need the following 

information: model number and product 

ID (these are found on the side of the 

appliance), nature of the fault and date of 

purchase. 

Please retain your receipt as 

proof of purchase. 

Your rights under this 

guarantee are additional to your statutory 

rights, which in turn are not affected by

this guarantee.

19

Содержание CLSTH050





















Отзывы: